Swimming pool tile manufacturers talk about the application of swimming pool tiles

For every public place, we pay attention to its safety. The focus of the overall design of the security situation is that no matter what place, even a little defect is not allowed to exist, especially the swimming pool. When building, we need to ensure that the construction is qualified! One of them is to do a good job in anti-skid on the ground, and the use of good swimming pool tiles has become a point of concern.

Generally, the general anti-skid areas of the swimming pool are mainly concentrated in the turning area in the swimming pool, the area 365mm away from the edge of the swimming pool, dressing room, disinfection pool, toilet and shower.

What are the requirements for the anti-skid bricks paved in these areas?

The turning area in the pool shall be carried out according to the anti-skid edge of European standard class B. for example, the aisle on the pool bank shall have the anti-skid performance of safe wetland barefoot, and people can't make their feet uncomfortable when they touch the ground; In addition, the disinfection pool is also an area that is easy to be ignored. The disinfection pool is an area that people must pass through when entering the pool, so it also needs attention.

In view of the fact that people are easy to slip in such an area, it is recommended to apply some small-sized pool mosaics or anti-skid pool bricks to ensure the anti-skid coefficient under the water and the safety of people's walking.

In recent years, there are more and more standardized swimming venues in China, but due to the lack of design and the negligence of construction technology, it may be more or less prone to some problems in the later operation. For example, the bottom of the swimming pool is arched; Cracking of pool brick at the edge of the pool; Wall pool brick falling off, etc. Of course, there are ways to prevent the above situations. Xiaobian summarized some experience today. I hope it can help you!

1. Because the structure of the swimming pool adopts self waterproof reinforced concrete structure and auxiliary waterproof layer and leveling layer materials, the designer needs to find some experienced and reliable design nodes, such as permeable waterproof materials for the waterproof layer and polymer cement mortar with good bonding effect for the leveling layer of the pool body, At the same time, deformation joints can also be set on the leveling layer at the bottom of the swimming pool, and then the elastic sealant can be used for overall sealing, so as to meet most of the needs of deformation at different substrate temperatures of the pool body.

2. Swimming pool tiles and all supporting adhesives and joint fillers shall be selected as recommended by fina. Professional construction team shall also be invited during swimming pool construction, so as to ensure the quality in the later stage of construction.